Please try again. You can also return home or contact us.
Raised panels, classic proportions and the warmth of a dark varnished finish. A Castilian-style entrance door that brings character to your home.
Illustrative finish visualization.
Final dimensions, glazing, hardware and installation are specified in the quotation.
Reference swatches from the 76 range. We confirm colour availability for your chosen system and the interior and exterior finishes. Screen colours may differ from physical samples.
PVC entrance doors
A 70 mm PVC entrance system with steel reinforcement and glazing up to 40 mm. Configure a door for everyday use and the insulation your home needs.
Made to measure. We agree the opening, infill, hardware and finish with you before manufacturing.
Explore the reference views and configurations. Open any image to see it larger.
| Nominal depth | 70 mm |
|---|---|
| Maximum glazing thickness | 40 mm |
| Published thermal resistance | 0,81 m²·K/W |
| Lock area | 3 mm |
| Hinge area | 2 mm · Square section |
| Frame | 1,5 mm · Square section |
| Mullion / transom | 1,5 mm · Square section |
Reinforced welded joints for larger configurations, subject to the project.
The technical sheet publishes this value without specifying the test configuration.
Inward or outward opening, with one or two leaves. Fixed panels, transoms and special shapes are confirmed for the chosen system and dimensions.
Opaque panel, clear or decorative glazing and mixed compositions, depending on configuration.
Sidelights, arches, straight, angled or curved transoms and decorative bars: feasibility is checked for each door.
Values refer to the described system. R and Uf are different quantities; they do not state the complete door’s Ud. Final insulation depends on the infill, dimensions, hardware and installation.
Thermal threshold with a plastic insert, frame-profile threshold or low aluminium threshold. The low threshold eases access, with a thermal trade-off compared with insulated options.
A 54 mm high thermal threshold is available depending on configuration.
Elastic perimeter seal. Windstop, an extra threshold seal and multipoint locking are options, subject to the selected configuration.
Reference hardware: Simonswerk · Hoppe · Winkhaus.
The sheet describes three hinges, with a fourth optional; the published hardware capacity is up to 120 kg. Hardware selection and permissible load are confirmed for the specific door.
Over 300,000 cycles published for the reference hardware; this is not a whole-door service-life guarantee.
Images show threshold, sealing, hinge and locking options. The final combination, compatibility and performance are specified in the quote.
Made to measure. We agree the opening, infill, hardware and finish with you before manufacturing.
PVC entrance doors
A 60 mm entrance system for glazing up to 32 mm. A compact base for infill, opening and finish options, with locking and sealing specified for your project.
Made to measure. We agree the opening, infill, hardware and finish with you before manufacturing.
Explore the reference views and configurations. Open any image to see it larger.
| Nominal depth | 60 mm |
|---|---|
| Maximum glazing thickness | 32 mm |
| Published thermal resistance | 0,73 m²·K/W |
| Lock area | 2 mm |
| Hinge area | 2 mm |
| Frame | 2 mm · Square section |
| Mullion / transom | 1,5 mm · U section |
Reinforced welded joints for larger configurations, subject to the project.
The technical sheet publishes this value without specifying the test configuration.
Inward or outward opening, with one or two leaves. Fixed panels, transoms and special shapes are confirmed for the chosen system and dimensions.
Opaque panel, clear or decorative glazing and mixed compositions, depending on configuration.
Sidelights, arches, straight, angled or curved transoms and decorative bars: feasibility is checked for each door.
Values refer to the described system. R and Uf are different quantities; they do not state the complete door’s Ud. Final insulation depends on the infill, dimensions, hardware and installation.
Thermal threshold with a plastic insert, frame-profile threshold or low aluminium threshold. The low threshold eases access, with a thermal trade-off compared with insulated options.
Elastic perimeter seal. Windstop, an extra threshold seal and multipoint locking are options, subject to the selected configuration.
Reference hardware: Simonswerk · Hoppe · Winkhaus.
The sheet describes three hinges, with a fourth optional; the published hardware capacity is up to 120 kg. Hardware selection and permissible load are confirmed for the specific door.
Over 300,000 cycles published for the reference hardware; this is not a whole-door service-life guarantee.
Images show threshold, sealing, hinge and locking options. The final combination, compatibility and performance are specified in the quote.
Made to measure. We agree the opening, infill, hardware and finish with you before manufacturing.
PVC entrance doors
A 76 mm entrance system for infill up to 50 mm, with a frame Uf of 1.3 W/(m²·K). Choose the configuration, threshold and finish for your entrance.
Made to measure. We agree the opening, infill, hardware and finish with you before manufacturing.
Explore the reference views and configurations. Open any image to see it larger.
| Nominal depth | 76 mm |
|---|---|
| Maximum infill thickness | 50 mm |
| Frame thermal transmittance Uf | 1,3 W/(m²·K) |
Overlay-panel leaf: 40 × 50 mm reinforcement, 2 mm thickness and welded seam. This specification applies to that leaf variant.
Leaf section: 114 mm for inward opening, 106 mm for outward opening with HPL, 124 mm for outward opening with heavy glass or automated hardware. These are profile dimensions, not door heights. Published installation width: up to 79 mm, distinct from the nominal 76 mm depth.
Four leaf variants, opening inward or outward to the left or right. Overlay panels can cover one or both faces of compatible leaves.
Insulating, decorative, tinted or sandblasted glazing; HPL panels; laminated/triplex glass for security or acoustic configurations, and thick XPS panels where specified. Acoustic insulation depends on the complete assembly; no single dB value is published.
Values refer to the described system. R and Uf are different quantities; they do not state the complete door’s Ud. Final insulation depends on the infill, dimensions, hardware and installation.
Polymer and rubber threshold with three seals at the bottom junction and Windstop. The deep lock position supports security options depending on hardware, infill and installation; no universal RC class is claimed.
Images show threshold, sealing, hinge and locking options. The final combination, compatibility and performance are specified in the quote.
Made to measure. We agree the opening, infill, hardware and finish with you before manufacturing.
PVC entrance doors
A 60 mm PVC entrance door with 1.5 mm steel reinforcement and glazing up to 32 mm. Configure the entrance to suit your space, use and preferred finish.
Made to measure. We agree the opening, infill, hardware and finish with you before manufacturing.
Explore the reference views and configurations. Open any image to see it larger.
| Nominal depth | 60 mm |
|---|---|
| Maximum glazing thickness | 32 mm |
| Published thermal resistance | 0,73 m²·K/W |
| Leaf | 1,5 mm · Closed square section |
| Frame | 1,5 mm · U section |
| Mullion / transom | 1,5 mm · U section |
The technical sheet publishes this value without specifying the test configuration.
Inward or outward opening, with one or two leaves. Fixed panels, transoms and special shapes are confirmed for the chosen system and dimensions.
Opaque panel, clear or decorative glazing and mixed compositions, depending on configuration.
Sidelights, arches, straight, angled or curved transoms and decorative bars: feasibility is checked for each door.
Values refer to the described system. R and Uf are different quantities; they do not state the complete door’s Ud. Final insulation depends on the infill, dimensions, hardware and installation.
Thermal threshold with a plastic insert, frame-profile threshold or low aluminium threshold. The low threshold eases access, with a thermal trade-off compared with insulated options.
Elastic perimeter seal. Windstop, an extra threshold seal and multipoint locking are options, subject to the selected configuration.
Reference hardware: Medos · Axor.
The sheet describes three hinges, with a fourth optional; the published hardware capacity is up to 120 kg. Hardware selection and permissible load are confirmed for the specific door.
Images show threshold, sealing, hinge and locking options. The final combination, compatibility and performance are specified in the quote.
Made to measure. We agree the opening, infill, hardware and finish with you before manufacturing.
PVC entrance doors
A 70 mm, six-chamber PVC entrance system for glazing up to 40 mm. Specific steel reinforcements in the leaf, frame and mullion support the made-to-measure configuration.
Made to measure. We agree the opening, infill, hardware and finish with you before manufacturing.
Explore the reference views and configurations. Open any image to see it larger.
| Nominal depth | 70 mm |
|---|---|
| Maximum glazing thickness | 40 mm |
| Published thermal resistance | 0,81 m²·K/W |
| Profile chambers | 6 |
| Lock area | 3 mm |
| Hinge area | 2 mm · Square section |
| Frame | 1,5 mm · U section |
| Mullion / transom | 1,5 mm · Square section |
Reinforced welded joints for larger configurations, subject to the project.
The technical sheet publishes this value without specifying the test configuration.
Inward or outward opening, with one or two leaves. Fixed panels, transoms and special shapes are confirmed for the chosen system and dimensions.
Opaque panel, clear or decorative glazing and mixed compositions, depending on configuration.
Sidelights, arches, straight, angled or curved transoms and decorative bars: feasibility is checked for each door.
Values refer to the described system. R and Uf are different quantities; they do not state the complete door’s Ud. Final insulation depends on the infill, dimensions, hardware and installation.
Thermal threshold with a plastic insert, frame-profile threshold or low aluminium threshold. The low threshold eases access, with a thermal trade-off compared with insulated options.
A 54 mm high thermal threshold is available depending on configuration.
Elastic perimeter seal. Windstop, an extra threshold seal and multipoint locking are options, subject to the selected configuration.
Reference hardware: Medos · Axor.
The sheet describes three hinges, with a fourth optional; the published hardware capacity is up to 120 kg. Hardware selection and permissible load are confirmed for the specific door.
Images show threshold, sealing, hinge and locking options. The final combination, compatibility and performance are specified in the quote.
Made to measure. We agree the opening, infill, hardware and finish with you before manufacturing.