PVC entrance doors
Purobert Termo70
A 70 mm PVC entrance system with steel reinforcement and glazing up to 40 mm. Configure a door for everyday use and the insulation your home needs.
- Nominal depth
- 70 mm
- Maximum glazing thickness
- 40 mm
- Published thermal resistance
- 0,81 m²·K/W
Made to measure. We agree the opening, infill, hardware and finish with you before manufacturing.
A closer look at the door
Explore the reference views and configurations. Open any image to see it larger.
System specifications
Steel reinforcement
| Nominal depth | 70 mm |
|---|---|
| Maximum glazing thickness | 40 mm |
| Published thermal resistance | 0,81 m²·K/W |
| Lock area | 3 mm |
| Hinge area | 2 mm · Square section |
| Frame | 1,5 mm · Square section |
| Mullion / transom | 1,5 mm · Square section |
Reinforced welded joints for larger configurations, subject to the project.
The technical sheet publishes this value without specifying the test configuration.
Openings and configurations
Inward or outward opening, with one or two leaves. Fixed panels, transoms and special shapes are confirmed for the chosen system and dimensions.
Opaque panel, clear or decorative glazing and mixed compositions, depending on configuration.
Sidelights, arches, straight, angled or curved transoms and decorative bars: feasibility is checked for each door.
Values refer to the described system. R and Uf are different quantities; they do not state the complete door’s Ud. Final insulation depends on the infill, dimensions, hardware and installation.
Technical drawings and construction details
Thresholds, sealing and hardware
Thermal threshold with a plastic insert, frame-profile threshold or low aluminium threshold. The low threshold eases access, with a thermal trade-off compared with insulated options.
A 54 mm high thermal threshold is available depending on configuration.
Elastic perimeter seal. Windstop, an extra threshold seal and multipoint locking are options, subject to the selected configuration.
Reference hardware: Simonswerk · Hoppe · Winkhaus.
The sheet describes three hinges, with a fourth optional; the published hardware capacity is up to 120 kg. Hardware selection and permissible load are confirmed for the specific door.
Over 300,000 cycles published for the reference hardware; this is not a whole-door service-life guarantee.
Images show threshold, sealing, hinge and locking options. The final combination, compatibility and performance are specified in the quote.
See all details
Request a quote for this door
Made to measure. We agree the opening, infill, hardware and finish with you before manufacturing.
